Phosphorescent Pigments
Lumilux® Effect Green N (50000)
Main use: Afterglow plastic sheets, screen printing inks, injection molding
General Information
- Application
- Ink
- Plastic
- Compatibility
- Alkalies
- Insoluble in water
- Organic solvents and decomposed by acids
- Maximum Particle Size
- 46, PSD50
- Particle Texture/Size
- Coarse (D50 30 - 40 µm)
- Product Type
- Luminescent/Phosphorescent Pigments Degrees Celsius
- Typical Uses
- Ceramics
- Enamel
- Solvent-based paints and inks
- Thermoplastics
- Thermosetting plastics
- Water-based paints
Physical Properties
- Brightness
- 3.1 after 60 minutes
- 66 after 5 minutes
- Min 97% after 10 min
- Chemical Composition
- ZnS: Cu
- Color
- Yellow-green
- Density
- 4.1 g/cm3
- Luminance DIN 67510-1
- 28 mcd/m2 after 10 min
- 3.1 mcd/m2 after 60 minutes
- 66 mcd/m2 after 5 minutes
- Particle Size Distribution
- < 46 μm, PSD50
- pH
- >11 of a waterbased slurry
- Phosphorescence Color
- Green
- Physical Form
- Powder
- Screen Analysis
- 1% oversized particles on 125 μm testing screen
- Solubility
- Insoluble
- Solubility in Water
- Insoluble
- Typical Afterglow Brightness
- Min 97% after 10 min
Safety Information
- Incompatible Materials
- Strong acids
General Information
- Application
- Ink
- Plastic
- Compatibility
- Alkalies
- Insoluble in water
- Organic solvents and decomposed by acids
- Maximum Particle Size
- 46, PSD50
- Particle Texture/Size
- Coarse (D50 30 - 40 µm)
- Product Type
- Luminescent/Phosphorescent Pigments Degrees Celsius
- Typical Uses
- Ceramics
- Enamel
- Solvent-based paints and inks
- Thermoplastics
- Thermosetting plastics
- Water-based paints
Physical Properties
- Brightness
- 3.1 after 60 minutes
- 66 after 5 minutes
- Min 97% after 10 min
- Chemical Composition
- ZnS: Cu
- Color
- Yellow-green
- Density
- 4.1 g/cm3
- Luminance DIN 67510-1
- 28 mcd/m2 after 10 min
- 3.1 mcd/m2 after 60 minutes
- 66 mcd/m2 after 5 minutes
- Particle Size Distribution
- < 46 μm, PSD50
- pH
- >11 of a waterbased slurry
- Phosphorescence Color
- Green
- Physical Form
- Powder
- Screen Analysis
- 1% oversized particles on 125 μm testing screen
- Solubility
- Insoluble
- Solubility in Water
- Insoluble
- Typical Afterglow Brightness
- Min 97% after 10 min
Safety Information
- Incompatible Materials
- Strong acids
- Particle Texture/Size : Coarse (D50 30 - 40 µm)
- Compatibility : Alkalies|Insoluble in water|Organic solvents and decomposed by acids
- Application : Ink|Plastic
- Typical Uses : Ceramics|Enamel|Solvent-based paints and inks|Thermoplastics|Thermosetting plastics|Water-based paints
- Maximum Particle Size : 46, PSD50
- Product Type : Luminescent/Phosphorescent Pigments Degrees Celsius
- Luminance DIN 67510-1 : 28 mcd/m2 after 10 min|3.1 mcd/m2 after 60 minutes|66 mcd/m2 after 5 minutes
- Typical Afterglow Brightness : Min 97% after 10 min
- Phosphorescence Color : Green
- Brightness : 3.1 after 60 minutes|66 after 5 minutes|Min 97% after 10 min
- pH : >11 of a waterbased slurry
- Chemical Composition : ZnS: Cu
- Screen Analysis : 1% oversized particles on 125 μm testing screen
- Solubility in Water : Insoluble
- Solubility : Insoluble
- Physical Form : Powder
- Particle Size Distribution : < 46 μm, PSD50
- Density : 4.1 g/cm3
- Color : Yellow-green
- Incompatible Materials : Strong acids