Phosphorescent Pigments
Lumilux® Effect Green N-F (50081)
Main use: Afterglow plastic sheets, screen printing inks, injection molding
General Information
- Application
- Ink
- Plastic
- Compatibility
- Insoluble in water, alkalies, organic solvents and decomposed by acids
- Maximum Particle Size
- 38, PSD50
- Particle Texture/Size
- Coarse (D50 30 - 40 µm)
- Product Type
- Luminescent/Phosphorescent Pigments Degrees Celsius
- Typical Uses
- Ceramics
- Enamel
- Solvent-based paints and inks
- Thermoplastics
- Thermosetting plastics
- Water-based paints
Physical Properties
- Brightness
- 2.7 after 60 minutes
- 27 after 10 minutes
- 64 after 5 minutes
- Chemical Composition
- ZnS: Cu
- Color
- Yellow-green
- Density
- 4.1 g/cm3
- Luminance DIN 67510-1
- 2.7 mcd/m2 after 60 minutes
- 27 mcd/m2 after 10 minutes
- 64 mcd/m2 after 5 minutes
- Particle Size Distribution
- < 38 μm, PSD50
- pH
- > 11 of a waterbased slurry
- Phosphorescence Color
- Green
- Physical Form
- Powder
- Screen Analysis
- < 0.5% oversized particles on 100 μm testing screen
- Solubility
- Insoluble
- Solubility in Water
- Insoluble
Safety Information
- Incompatible Materials
- Strong acids
General Information
- Application
- Ink
- Plastic
- Compatibility
- Insoluble in water, alkalies, organic solvents and decomposed by acids
- Maximum Particle Size
- 38, PSD50
- Particle Texture/Size
- Coarse (D50 30 - 40 µm)
- Product Type
- Luminescent/Phosphorescent Pigments Degrees Celsius
- Typical Uses
- Ceramics
- Enamel
- Solvent-based paints and inks
- Thermoplastics
- Thermosetting plastics
- Water-based paints
Physical Properties
- Brightness
- 2.7 after 60 minutes
- 27 after 10 minutes
- 64 after 5 minutes
- Chemical Composition
- ZnS: Cu
- Color
- Yellow-green
- Density
- 4.1 g/cm3
- Luminance DIN 67510-1
- 2.7 mcd/m2 after 60 minutes
- 27 mcd/m2 after 10 minutes
- 64 mcd/m2 after 5 minutes
- Particle Size Distribution
- < 38 μm, PSD50
- pH
- > 11 of a waterbased slurry
- Phosphorescence Color
- Green
- Physical Form
- Powder
- Screen Analysis
- < 0.5% oversized particles on 100 μm testing screen
- Solubility
- Insoluble
- Solubility in Water
- Insoluble
Safety Information
- Incompatible Materials
- Strong acids
- Application : Ink|Plastic
- Compatibility : Insoluble in water, alkalies, organic solvents and decomposed by acids
- Typical Uses : Ceramics|Enamel|Solvent-based paints and inks|Thermoplastics|Thermosetting plastics|Water-based paints
- Product Type : Luminescent/Phosphorescent Pigments Degrees Celsius
- Particle Texture/Size : Coarse (D50 30 - 40 µm)
- Maximum Particle Size : 38, PSD50
- pH : > 11 of a waterbased slurry
- Brightness : 2.7 after 60 minutes|27 after 10 minutes|64 after 5 minutes
- Screen Analysis : < 0.5% oversized particles on 100 μm testing screen
- Color : Yellow-green
- Chemical Composition : ZnS: Cu
- Solubility : Insoluble
- Physical Form : Powder
- Solubility in Water : Insoluble
- Particle Size Distribution : < 38 μm, PSD50
- Luminance DIN 67510-1 : 2.7 mcd/m2 after 60 minutes|27 mcd/m2 after 10 minutes|64 mcd/m2 after 5 minutes
- Phosphorescence Color : Green
- Density : 4.1 g/cm3
- Incompatible Materials : Strong acids