Outage Notification: This website will undergo a planned maintenance outage on Saturday, June 5, from 12:30-2:30 p.m. EDT (6:30-8:30 p.m. UDT). We regret any inconvenience this may cause.

Plastics & Rubber

ACumist® D-9

Medium density polyethylene (LDPE) Homopolymer

Micronized Polyethylene Homopolymer for use general purpose solvent borne coatings, stains and lacquers, and gravure inks. It provides a good balance of properties where economics are of paramount concern. Good for slip, scratch, abrasion resistance and matting. 

General Information

  • Application
    • Tapes
    • Hot Melt
    • Solvent Borne
    • Reactive
    • Water Borne
    • Pressure Sensitive
    • EPS
  • Performance Function
    • Anti-Blocking
    • FT Replacement
    • Nucleation
  • Type
    • Styrenics
    • WB Flexo
    • Screen Inks
    • SB Gravure
  • Physical Form
    • Micronized Powder
  • Product Family
    • PE Homopolymer
  • Size
    • 8.0 to 10.0
  • Industry
    • Plastics & Rubber
    • Adhesives

Properties

  • Acid Number
    • Nil
  • Hide Drop Point
    • No
  • Hardness
    • < 2.0 at 25 °C
  • Density
    • 0.94
  • Drop Point Mettler
    • 118 °C (244 °F)

Standards & Approvals

  • FDA Indirect Food Additives Approval*
    • Yes
  • Plastic Pipe Institute/NSF*
    • No
  • FDA Direct Food Additives Approval*
    • No

Sampling

  • Sample Products
    • Yes

General Information

  • Application
    • Tapes
    • Hot Melt
    • Solvent Borne
    • Reactive
    • Water Borne
    • Pressure Sensitive
    • EPS
  • Performance Function
    • Anti-Blocking
    • FT Replacement
    • Nucleation
  • Type
    • Styrenics
    • WB Flexo
    • Screen Inks
    • SB Gravure
  • Physical Form
    • Micronized Powder
  • Product Family
    • PE Homopolymer
  • Size
    • 8.0 to 10.0
  • Industry
    • Plastics & Rubber
    • Adhesives

Properties

  • Acid Number
    • Nil
  • Hide Drop Point
    • No
  • Hardness
    • < 2.0 at 25 °C
  • Density
    • 0.94
  • Drop Point Mettler
    • 118 °C (244 °F)

Standards & Approvals

  • FDA Indirect Food Additives Approval*
    • Yes
  • Plastic Pipe Institute/NSF*
    • No
  • FDA Direct Food Additives Approval*
    • No

Sampling

  • Sample Products
    • Yes
  • Type : Styrenics|WB Flexo|Screen Inks|SB Gravure
  • Physical Form : Micronized Powder
  • Product Family : PE Homopolymer
  • Size : 8.0 to 10.0
  • Application : Tapes|Hot Melt|Solvent Borne|Reactive|Water Borne|Pressure Sensitive|EPS
  • Performance Function : Anti-Blocking|FT Replacement|Nucleation
  • Industry : Plastics & Rubber|Adhesives
  • Acid Number : Nil
  • Hide Drop Point : No
  • Hardness : < 2.0 at 25 °C
  • Density : 0.94
  • Drop Point Mettler : 118 °C (244 °F)
  • FDA Indirect Food Additives Approval* : Yes
  • Plastic Pipe Institute/NSF* : No
  • FDA Direct Food Additives Approval* : No
  • Sample Products : Yes
Technical Note
Name
Description
File Size
Date
Size
Typical properties
application/pdf 88.67 KB
5/5/2022
88.67 KB
Typical properties
application/pdf 88.67 KB
9/7/2022
88.67 KB
Data Sheet
Name
Description
File Size
Date
Size
ACumist® D-9, Micronized Polyethylene Homopolymer for use general purpose solvent borne coatings, stains and lacquers, and gravure inks. It provides a good balance of properties where economics are of paramount concern.
application/pdf 5.26 KB
6/18/2021
5.26 KB
ACumist® D-9, Micronized Polyethylene Homopolymer for use general purpose solvent borne coatings, stains and lacquers, and gravure inks. It provides a good balance of properties where economics are of paramount concern.
application/pdf 5.26 KB
9/7/2022
5.26 KB
Name
Description
File Size
Date
Size
ACumist® D-9, Micronized Polyethylene Homopolymer for use general purpose solvent borne coatings, stains and lacquers, and gravure inks. It provides a good balance of properties where economics are of paramount concern.
5.26 KB
6/18/2021
5.26 KB
Typical properties
88.67 KB
5/5/2022
88.67 KB
Typical properties
88.67 KB
9/7/2022
88.67 KB
ACumist® D-9, Micronized Polyethylene Homopolymer for use general purpose solvent borne coatings, stains and lacquers, and gravure inks. It provides a good balance of properties where economics are of paramount concern.
5.26 KB
9/7/2022
5.26 KB
Name
Description
File Size
Date
Size
Typical properties
88.67 KB
5/5/2022
Typical properties
88.67 KB
9/7/2022
ACumist® D-9, Micronized Polyethylene Homopolymer for use general purpose solvent borne coatings, stains and lacquers, and gravure inks. It provides a good balance of properties where economics are of paramount concern.
5.26 KB
6/18/2021
ACumist® D-9, Micronized Polyethylene Homopolymer for use general purpose solvent borne coatings, stains and lacquers, and gravure inks. It provides a good balance of properties where economics are of paramount concern.
5.26 KB
9/7/2022